Ciare CH201
4Ω
Full-range
| Nominal diameter | 10″ / 250 mm |
| Resonance | 77 Hz |
| Q factor | 0.44 |
| Sensitivity | 95.1 dB |
| Linear excursion | ± 3.5 mm |
| Program Power | 250 W |
Discontinued
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.1dB
Thiele & Small parameters
- Resonance frequency (free air) fS 77Hz
- Mechanical quality factor QMS 4.97
- Electrical quality factor QES 0.48
- Total quality factor QTS 0.44
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 72cm³
- Power handling P 100W
- Program power Pmax 250W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.0Ω
- Inductance (1kHz) LE 0.08mH
- VC Diameter 38mm
- Former material Kapton
Magnet
- Force factor Bl 6.58N/A
- Motor constant Bl/√RE 3.8N/√W
- Air gap height HAG 8mm
Diaphragm
- Effective diameter 163mm
- Effective area SD 206cm²
- Moving mass MMS 14.5g
- Moving mass (without air load) MMD 12.2g
Suspensions
- Stiffness KMS 3.23N/mm
- Compliance CMS 310µm/N
- Equivalent volume to the compliance VAS 18.7L
- Mechanical resistance RMS 1.41N·s/m
- Surround material Fabric
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 206mm
- Overall depth 84mm
- Flange thickness 8mm
- Mounting depth 76mm
- Volume occupied by the driver (estimated) 0.68L
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)