Dayton Audio Reference RS225-4
4Ω
8ΩWoofer
| Nominal diameter | 8″ / 223 mm |
| Resonance | 33 Hz |
| Q factor | 0.41 |
| Sensitivity | 86.6 dB |
| Linear excursion | ± 6 mm |
| Program Power | 160 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.6dB
- Frequency response 35 - 2300Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 33Hz
- Mechanical quality factor QMS 2.02
- Electrical quality factor QES 0.52
- Total quality factor QTS 0.41
Large signal parameters
- Maximum linear excursion (one way) xmax 6mm
- Air volume displaced at xmax VD 128cm³
- Power handling P 80W
- Program power Pmax 160W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 0.49mH
- VC Diameter 38mm
- Winding material Copper
- Former material Aluminum
Magnet
- Force factor Bl 6.38N/A
- Motor constant Bl/√RE 3.57N/√W
- Material Ferrite
Diaphragm
- Effective diameter 165mm
- Effective area SD 214cm²
- Moving mass MMS 32.2g
- Moving mass (without air load) MMD 29.8g
- Material Black Anodized Aluminum
Suspensions
- Stiffness KMS 1.39N/mm
- Compliance CMS 720µm/N
- Equivalent volume to the compliance VAS 46.4L
- Mechanical resistance RMS 3.31N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 8″
- 223mm
- Overall diameter 223mm
- Baffle cutout diameter 184mm
- Overall depth 92mm
- Volume occupied by the driver (estimated) 0.86L
- Frame material Cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.jpg.webp)