Ciare CW455
4Ω
Woofer
| Nominal diameter | 18″ / 450 mm |
| Resonance | 35 Hz |
| Q factor | 0.24 |
| Sensitivity | 97.2 dB |
| Linear excursion | ± 6 mm |
| Program Power | 1000 W |
Discontinued
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 97.2dB
Thiele & Small parameters
- Resonance frequency (free air) fS 35Hz
- Mechanical quality factor QMS 19.88
- Electrical quality factor QES 0.24
- Total quality factor QTS 0.24
Large signal parameters
- Maximum linear excursion xmax 6mm
- Air volume displaced at xmax VD 679cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.2Ω
- Inductance (1kHz) LE 1.03mH
- VC Diameter 100mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Force factor Bl 21.8N/A
- Motor constant Bl/√RE 12.3N/√W
- Air gap height HAG 10mm
- Material Ferrite
Diaphragm
- Effective diameter 384mm
- Effective area SD 1131cm²
- Moving mass MMS 164g
- Moving mass (without air load) MMD 136g
Suspensions
- Stiffness KMS 7.69N/mm
- Compliance CMS 130µm/N
- Equivalent volume to the compliance VAS 236L
- Mechanical resistance RMS 1.81N·s/m
- Surround material Nomex
Dimensions
- Nominal diameter 18″
- 450mm
- Overall diameter 460mm
- Baffle cutout diameter 416mm
- Overall depth 174mm
- Flange thickness 17mm
- Mounting depth 157mm
- Volume occupied by the driver (estimated) 5.3L
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)